Bushy-Tailed Jirds – Genetics Glossary

Bushy-Tailed Jird Facts – Definitions and Glossary

Bushy-Tailed Jirds are quite new as pets, but there is still plenty to know about them – so we have started a glossary to get things started for us all – and we will add more as we learn more.

They are in alphabetical order as best we can, but will be repeated throughout if they have lots of definitions or ways of being described – just to make sure you find what you are looking for.

Right, here goes…

A

the way of writing the dominant version of the Agouti gene – so far the only gene being expressed in Bushy-Tailed Jirds

AA

the way of writing the dominant version of the Agouti gene is the only gene available as all Bushy-Tailed Jirds out there are currently agouti.  Also, as Bushy-Tailed Jirds currently only have agouti pups it is unlikely there is anything else out there. However, the recessive form of the gene (a) will be recessive and so two animals both carrying this recessive version would need to be bred together to create a black Bushy-Tails .  Seeing as there aren’t many Bushy-Tails about these days, the chances of this happening are slim – but until then we won’t know if it exists either way. So using the genetic nomenclature of A* (or A^ or A-) are all acceptable

A* (or A^ or A-)

the way of writing that you only know for sure that your Bushy-Tail has at least one agouti gene (making it agouti in colour as it is dominant on its own).  The symbol after the A indicates that there may be an unidentified gene present that we do not yet know about

Agouti (Golden Agouti)               

the color of a wild Bushy-Tailed Jirds (and all our pet Bushy-Tails so far) – it has a golden brown ticked coat, with dark eyes and a white belly.  It is the only expressed colour so far as no other colour mutations have yet been found (or reported)

Agouti Gene      

this gene is the gene which determines whether jirds and other wild rodents have a ticked coat and white belly as adults.  

Argente

this color does not yet exist in known Bushy-Tailed stock, but is one of the most likely ‘first’ colour mutations as seen in most rodents in the pet trade.  It would give red eyes and a more ginger coat – but would keep the white tummy.

Bushy Tails

the words that give these wonderful jirds their monikar – they have lovely long bushy tails and there is no hiding them at all

c

this would indicate a standard recessive version of the colorpoint gene.   It represents ‘albino’ in many other rodent fancies, but this gene has yet to be identified/reported in Bushy-Tailed stock

carries (i.e. carries a gene)

to carry a gene means that that specific gene is one of the two genes at a particular locus that each Bushy-Tail is ‘allowed’ to have – you may or may not know what this gene is.  Often, when this is used to refer to the second or unused gene – it is often called a ‘hidden gene’

Clan (singular)

this is the name given to a group of two or more Bushy-Tailed Jirds living together in the same cage or other set-up.  A Persian clan usually has a dominant female gerbil, her partner and then all the others (their younger offspring) fall into a sort of pecking order downwards.  Clans are very loosely bonded, and they often disperse and need to live singly as adults

Clan (plural)

this is the name given sometimes to a whole collection of Bushy-Tailed Jirds (or other rodents) held by a breeder (also sometimes called a kennel).  Breeders are able to choose a Clan Name (a show or kennel name) that they can attach to their individual jirds names to show where they came from and to distinguish them in show circles – for example RodentZone Jiggly Jennifer (where RodentZone is the clan name, Jennifer is the individual jirds name (where Jiggly shows the line she was from and Jennifer (or Jennie) is her pet name))  NB: you can follow any naming pattern you want – and you don’t need to be a registered breeder or regular show attendee to use them

Coat Color

coat color genes affect the color of the coat itself and in Mongolian gerbils are represented with the letters A C D E P and Uw).  We don’t yet know the coat color genes available for Bushy-Tailed Jirds, but we could assume either AA is it (ie the jird is agouti in colour and that is the only gene available) or we could assume they would follow the genes available in the Mongolian Gerbil and assume that they were all currently AACCDDEEPPUwUw.

Coat Type

coat type describes the effects that can be laid over the top of the coat color to give it a different appearance – including wavy-haired or rex coats. Bushy-Tailed Jirds do not yet have any reported coat types other than that of the current stock

Domestic Animal

this describes animals that have been bred over time from a wild animal into one that is more suited to living with humans.  Many exotic pets like Bushy-Tailed Jirds (still only found in their ‘wild’ color coat) are not to be confused with ‘exotic pets’ which are from different countries and have specific temperature/humidity/UV or other specialised requirements

Dominant

the word used to describe a version of a gene that always shows itself in the color or appearance of a Bushy-Tailed Jird if it is present – like Agouti (A).  You cannot carry a dominant gene – it can’t be ‘hidden’

Exotic Animals

this word is used to describe one of three things: 1) species of animals that have been pets for a long time but are still quite unusual in the world of mainstream pets (for example snakes and chipmunks); then 2) species of animals that haven’t been pets for very long and so are closer to their wild counterparts – like Persian Jirds.  As a result there is less know about their diets, behaviour and breeding as well as their medical care and other needs (for example Great Gerbils and Prairie Dogs); and 3) species of animals that have to have specialist care based on their original habitat and who usually can’t survive without it (for example tree frogs and salt-water fish).  Some vets even call normal gerbils exotic pets…

Fancy

a word used to describe the love of a certain domestic animal to the point where people are breeding them for pets and for show.  Bushy-Tailed Jirds can be shown at standard gerbil shows and it is is in the very early stages of becoming a fancy.

First Generation

this is used to describe all the pups from two single parents – regardless of how many pups they have together.  All their pups only have the genes given to them from these same parents. It is usually shown as F1, where the F stands for ‘filial’

Gene

the word used when describing the thing that will (or won’t) affect your jirds color, hair type (or anything else that makes your Bushy-Tailed Jird a Bushy-Tailed Jird) – like the ‘schimmel gene’ or the ‘extreme white gene’ (neither yet reported in Bushy-Tails)

Gene Pool

this describes the genes available within a collection of Bushy-Tailed Jirds.  It can mean just within your clan – the genes you can use over and over to create the best Bushy-Tails possible (like bigger eyes, bushier tails or smallest feet (?)); or it can mean all the genes in all the Bushy-Tailed Jirds of the world

Genetic Nomenclature

this phrase is used to describe how a Bushy-Tailed Jirds genes can be written down.  It uses a system of uppercase and lowercase letters (one for each gene) used across the whole world to help express an animals genes uniformally.  It includes all known genes as well as symbols to represent unknown or unproven genes

Genotype

this word describes the genes that are present in your Bushy-Tailed Jirds whether you can see them or not (basically it is your genetic notation)

Inbreeding

this term usually describes the action of indiscriminate breeding of close family members together – like mothers to sons and uncles to nieces, etc.  It is usually looked on in a negative way in the fancy – as breeding with closely related individuals over and over again in a small population can ‘bring out’ or inflate the likelihood of negative traits.  It can also be used carefully to bring out a favourable trait in a small population where it is known as Line Breeding which can be an essential tool when starting out with a relatively ‘new’ pet like a Bushy-Tailed Jird

Line Breeding

this term usually describes a concerted effect to breed in and increase the likelihood of a specific trait appearing in a population – for example; a longer tail, a new color or coat type, or to eliminate an undesirable gene from a small population.  It is also used in founder populations, to make sure the species stays pure (ie there is no cross breeding of other similar subspecies). Line Breeding involves breeding close relatives together (known as a ‘line’) and is carefully planned and executed over a period of time for the safest results

Meiosis

this describes the biological action of gene sorting and cell division.  An egg or sperm cell has only half the information of a whole cell. This happens because you need two halves to make a whole new cell (a baby)  Anyway, to get these half cells, a normal whole cell has to divide into two – but before it divides in half – it mixes up all the information inside and lays it out slightly differently.  This re-shuffling process produces individuals and is the reason why you don’t look exactly that same as your brothers, sisters or your nan

Morphological Features

this word describes the shape, size and structure of an organism.  It can be different within the same species depending on what those different animals do (for example dog breeds are all morphologically different) but on a smaller scale if can mean something more simple like pet Persian Jirds may have slightly longer-flufflier tails than in the wild as they would most likely have been selectively bred over time to look more and more cute

Phenotype

this word describes the appearance of your Persian Jirds from the outside.  A phenotypic change in your Persian Jirds would be if for example it was born with a really short tail, or it had enormous ears  

Piebalding

this describes the increasing amount of white fur on an animal, from one spot to a virtually white creature.  Piebalding is not yet reported to be present in wild or domestic Persian Jirds

Population

this describes thePersian Jirds that are able to breed with each other as required.  It could mean just your own clan, your clan plus neighbouring breeders, or your clan and your whole country.  Basically, the population of a species, biologically speaking, is those individuals which can meet and produce more young

Sekeetamys calurus

the binomial name for the species ‘Bushy-Tailed Jird’.  It is on its own in this genus so there are no other sekeetamys in the world.  Its currently listed on Wikipedia in the same Tribe as all the other usual gerbils and jirds – like Mongolian gerbils and Giant Gerbils – but not enough is known about it – so it is currently in a category called ‘incertae sedis’ which sort of means – they don’t really know where it fits but it should be sort of around here?  Perhaps a great school project right there?

Selective Breeding

this word describes the process by humans or changing or controlling the appearance or health of an animal over time to improve, enhance or remove a feature or series of features that are either desirable or undesirable.  For example; wild Bushy-Tailed Jirds may have big eyes to help them escape from their many predators – however pet Bushy-Tailed Jirds don’t need to worry about that. So, over time, by selecting the healthiest Bushy-Tailed Jirds with  the smallest eyes, breeders can gradually reduce the ‘natural’ size of the eyes by the accumulation of that effect.  A more simple use of the term will be where breeders who want to – quite rightly show the Bushy-Tailed Jirds with the bushiest tail – so when selecting their breeding stock will only select those Jirds with the most bushy tails to breed from in the first place. They will select against (not choose) Jirds with bald or short tails with the effect of increasing the chances of getting more and more bushy tails in their litters

Ticked Coat

this phrase is used to describe the appearance of an agouti-based Bushy-Tailed Jirds coat – and is created by the individual hairs being three different colors throughout its length.  If you part a Bushy-Tailed Jirds fur, it will appear a different color underneath. You should see black tips, gingery middle and a greyish base

Very Cute

the phrase used to describe most Bushy-Tailed Jirds

Leave a Comment